Dave's Garden - Gardening Community
Sponsored Links: Gardeners Supply - Mail Order Plants - Landscape Design - Plant Nurseries Mail Order - Flowering Bulbs - Winter Landscaping

Garden Design: My Reed Fence Frame Design Works!!!!

  Welcome!  
You've found the famous Dave's Garden website! Join this friendly global community that shares tips and ideas for home and gardens, along with seeds and plants!

Check out the DG homepage for a brief overview of what you'll find in this gardening mega-site.

  Login  
If you don't have an account yet, visit the registration page to sign up.

Username:

Password:

Forum: Garden DesignReplies: 19, Views: 606
Print -
AuthorContent
Xeramtheum
Summerville, SC
(Zone 8a)

May 04, 2007
12:58 PM

Post #3463105

I was delighted to find that my design of the frame for the reed fence worked beautifully. Not only was it low cost, but very easy to construct and attach to the chain link fence. Keeping in mind hurricanes, I decided to make separate panels instead of a continuous frame. Each panel is as long as the distance between the posts on the fence and 6’ 3” high. The panels are secured with wire.

For this panel I bought 3, 12’ x 4” x 1” pieces of board, 2 corner braces and 4 L-brackets. I ripped each panel into thirds, width wise then cut the lengths I needed and made miter cuts on the top and two sides for 2 frames. The back frame was constructed completely making sure to get the center piece level with the top of the chain link fence and got the corner braces and L-brackets. The reed fencing was rolled out and cut to size on the frame, then stapled down about every 6 inches on the top and two sides. The front frame was screwed on in sections, sandwiching the reed. Once done it was lifted (it’s surprisingly light!) and put up against the fence and secured with bailing type wire using the chain link posts and top rail as the anchors.

The neat thing about them is that when a hurricane comes, all I have to do is cut the wire, lay them flat and secure them!

The cost per panel came to about 35 dollars, for wood, hardware and reed and took about 2 hours to cut, construct and tie up with a friend. I was amazed at how easy it was.

X

This message was edited May 4, 2007 5:02 PM

Thumbnail by Xeramtheum
Click the image for an enlarged view.

This thread has 19 replies. This forum is accessible only to subscribing members of Dave's Garden. There are many free features here, and about half of our forums are completely open to all members. Take a tour of our site and learn more about Dave's Garden, and explore the benefits of becoming a subscribing member.

Want to join? Register here. Already signed up? Click here to login!

Other Garden Design Threads you might be interested in:

SubjectThread StarterRepliesLast Post
Landscaping software? Joan 24 Feb 17, 2008 1:07 PM
Rubber Border Mulch from Gardener's Supply Company drop 37 Jun 8, 2007 8:32 AM
Garden Paths RWhiz 136 Jan 20, 2009 5:50 PM
Need suggestions for covering big white fence crystalnurse 76 Jun 23, 2008 8:50 AM
OK, here's my Spring project!! Wifeygirl 103 Mar 19, 2007 1:32 PM


We recommend Firefox
Overwhelmed? There's a lot to see here. Try starting at our homepage.

[ Home | About | Advertise | Mission | Acceptable Use Policy | Tour | Privacy Policy | Contact Us ]

Back to the top

Copyright © 2000-2009 Dave's Garden. All Rights Reserved.
 

NameMedia Home and Gardens
Share on FacebookShare on Stumbleupon

Hope for America