|
You've found the famous Dave's Garden website! Join this friendly global community that shares tips and ideas for home and gardens, along with seeds and plants! Check out the DG homepage for a brief overview of what you'll find in this gardening mega-site.
|
|
 |
| Author |
Content |
flowerchild66
Eau Claire, WI
March 23, 2008
11:38 PM Post #4701390
|
I have a black Kenmore ceramic stove (4 days old). My son accidentally set his fleece jacket on a burner that was still warm, removed it quickly, but the fleece melted on the burner and the cleaner that came with the stove won't remove it - it's stuck hard. Does anyone have any advice on how to remove this? Thank you! |
Katlian
Carson City, NV
(Zone 6b)
March 23, 2008
11:52 PM Post #4701431
|
By ceramic stove do you mean ceramic burners or the smooth glass top type?
We have the smooth top type and I accidentally melted part of my blender on it once. We got the melted plastic off by heating up the burner again and wiping it with a wad of paper towels when the plastic got soft. A flat, blunt metal scraper (for making pastry) won't scratch the surface if used lightly.
The cleaning product that we use to clean up burnt food is called "Barkeeper's Friend." It's a powder, sort of like Ajax but not as harsh. Lowes hardware store carries it around here.
I hope that helps, good luck. |
ecrane3
Dublin, CA
(Zone 9a)
March 23, 2008
11:53 PM Post #4701436
|
Did you try scraping it? I'd try that, and if that doesn't work then you might try turning the burner on (very low heat!) for a short time, just enough to see if you can soften up the melted fleece again and scrape it off while it's soft. I accidentally melted the bottom of a plastic container on mine once and I got a lot of it off by scraping (when the stove was cool) and then turned on the heat just a little and was able to soften the rest up and scrape it off. |
flowerchild66
Eau Claire, WI
March 24, 2008
11:20 AM Post #4702817
|
It is a smooth glass type. I'll try warming and scraping it. Thanks so much for the advice! |
flowerchild66
Eau Claire, WI
March 24, 2008
5:47 PM Post #4704384
|
I tried warming and scraping with a hard plastic scraper and it didn't work. Should I use a razor blade or will that scratch it? Thanks again. |
ecrane3
Dublin, CA
(Zone 9a)
March 24, 2008
10:22 PM Post #4705798
|
I'd try the razor blade, I use one on my stove and it doesn't seem to scratch. Do it gently though but I think you'll be fine. I don't think the plastic scrapers are hard enough to really get stuff off well. Or you may need to warm a little more--you need to get to the point where the fleece starts to soften up. |
Katlian
Carson City, NV
(Zone 6b)
March 25, 2008
11:17 AM Post #4707589
|
If you get the stove warm enough to soften the fleece you run the risk of melting part of your plastic scraper onto the same burner. We use the metal pastry scraper on ours frequently and it hasn't seemed to damage the surface. You could also try a metal spatula or paint scraper. |
flowerchild66
Eau Claire, WI
March 26, 2008
12:35 PM Post #4712029
|
Thank you all for the advice - the razor blade worked great and didn't damage the top at all - it looks like new! Thanks again! |
|
You cannot post until you register, login and subscribe. Other Clean and Clutter-free Threads you might be interested in:
|
